DIST2 Dual-Impedance Bass Speaker Cabinets

DIST2 Dual-Impedance Bass Speaker Cabinets

from 799.00

Introducing DIST2
The only dual-impedance bass speaker system that delivers true world-class tone. A ground-up redesign based on years of tireless research. A new dual voice-coil speaker design. Re-engineered interior baffling. An advanced crossover featuring user-switchable impedance from 4 Ohms to 8 Ohms. Legendary Sound never sounded so good.

  • Custom Epifani dual voice-coil neodymium drivers by Eminence

  • User switchable between 4 Ohms and 8 Ohms

  • 1x12 (350W) and 2x10 (500W) speaker configuration

  • Eminence compression tweeter w/ level control

  • Parallel combination Speakon™ / 1/4-inch connectors

Configuration:
Quantity:
Add To Cart

Two Sizes,
Countless Possibilities

Fill any stage with two 10s. Or four.
With a combined power handling of 500 watts, this 2x10 puts all others to shame. A pair of custom Neo drivers move fast, producing a highly accurate sound all your own. Perfectly placed front ports round out the lows and low-mids.

Combining two cabs gives you the ultimate versatility. With up to 1000 watts of power handling every show becomes epic.

Powerful and portable 1x12.
Bring a massive sound wherever you go. The compact 1x12 packs a punch without the extra weight. The dual voice-coil Neodymium driver can handle up to 350 watts of clear, fast power. Yet the whole cabinet weighs just 28 pounds.

Need more? Stack two cabs, and switch both to 8 Ohms. The high speed drivers will keep your attack super-clean.

epifani-dist2-112-210.jpg


dist2-hero.jpg

Perfectly Balanced Sound
True tonal balance is the name of the game. Your lows are thundering but never boomy. Your highs are crisp, bright, and brilliant without the shrill overtones.. And, your mids are perfectly tuned to cut through the band, filling any room with every detail of your bass line.

Superior Design
Modern engineering and unparalleled craftsmanship are the keys to legendary sound. From the crease-resistant drivers to the complex network of interior baffling, every element comes together in concert to create a symphony of full spectrum sound.

Tuned By Master Craftsmen
For decades Nick Epifani has painstakingly tuned each cabinet to perfection. From the setting of every speaker to the placement of each connector, nothing is left to chance. When done right, the ports, baffles, and braces become like additional speakers, working in concert to create a full, rich tone you won't find anywhere else. Even the placement of the rugged, steel handles and protective ABS corners is carefully considered to provide easy transport.

cab-controls.jpg

Dual-Impedance
Get the most out of your amp. When you’re using a single DIST2 cab set the impedance to 4 Ohms to get the most power from your amp. Or, add a second cabinet and switch the impedance of both cabs to 8 Ohms. That will give you a total impedance of 4 Ohms and the ultimate efficiency, drive, and power.

A Smarter Crossover
The crossover acts like an onboard computer, deciding which frequencies are sent to the woofers and tweeters. Naturally, they’re perfectly tuned by Nick Epifani himself. Built with high quality polypropylene capacitors specially designed to precisely render sparkling, clear frequencies.


Specs

DIST2 2x10

Configuration
2 x 10-inch 250+ Watt Epifani Neodymium Dual Voice-Coil drivers
1 x 1-inch compression tweeter with adjustable control

Impedance
User switchable between 4 Ohms and 8 Ohms

Performance
Power: 500+ Watts RMS
Response: 40Hz - 16kHz
Sensitivity: 103dB (1W@1m)

Connections
2 x Combination Neutrik Speakon and 1/4-inch input/output connectors

Hardware
Lite-Ply Italian Poplar with Dado Joint construction
Steel recessed handles
18-gauge steel grill
High-impact steel corners
Laster-etched logo

Dimensions
18.5 in x 23 in x 17.75 in
(46.9 cm x 58.4 cm x 45 cm)

Weight
38 pounds
(17.2 kg)

DIST2 1x12

Configuration
1 x 12-inch 350 Watt Epifani Neodymium Dual Voice Coil drivers
1 x 1-inch compression tweeter with adjustable control

Impedance
User switchable between 4 Ohms and 8 Ohms

Performance
Power: 350+ Watts RMS
Response: 44Hz - 16kHz
Sensitivity: 103dB (1W@1m)

Connections
2 x Combination Neutrik Speakon and 1/4-inch input/output connectors

Hardware
Lite-Ply Italian Poplar with Dado Joint construction
Reinforced carrying handle
18-gauge steel grill
High-impact steel corners
Laster-etched logo

Dimensions
20.5 in x 16.25 in x 17.25 in
(52 cm x 41.2 cm x 48.8 cm)

Weight
28 pounds
(12.7 kg)